Re: Need help reconnecting to DC++ hubs (OTRHub and Phils Place)


Philip Atchley
 

Here is address info on all the hubs I belong to, minus my user ID and password of course.

Oldtymeradioman Hub
otr.ath.cx
NEW ADDRESS: oldtymeradioman.ddns.net


OTR Hub
otrhub.no-ip.org:411


PhilsPlace Hub
philsplace2.dyndns.org:4554


DooDropInn
roysdoodropinn.no-ip.org:3588

<>< 73 From "The Beaconeer's Lair" <><

Specializing in DXing NDBs (Longwave Beacons)
Phil, KO6BB, http://www.qsl.net/ko6bb/

HF/LF RADIOS:
YAESU: FTDX-101MP Xceiver, Dual SDR Receivers (~2020)
YAESU: FTDX-3000 Xceiver, DSP IF, 300Hz Roofing filter (~2019).
Uniden: SDS-200 Scanner, 25-1300MHz (2020)
Portable: Eton Elite 750 (2), AKA Grundig Satelite 750 (2020)
Sangean ATS-909X2 (2021), Tecsun PL-990 (2021)
HOMEBREW: 7 Tube+Rect 1v3 Regen RX for LF (built 2015)
SDRS: Perseus 10KHz-40MHz (2020)
Softrock Ensemble II LF Receiver (kit, 2017)
Softrock Ensemble II HF Receiver (Kit, 2019)
ACC: MFJ-993B Auto Antenna Matcher.
HOMEBREW LF-MF Pre-Amp, 8Hz Audio Filter.
HOMEBREW 4 Port Antenna Multicoupler, Feeds 4 RX's.

ANTENNAS: 88 foot Long Ladder-line fed dipole, ~35 feet AGL for MW/HF.
Top Loaded Tee (Dipole fed as single element) ~35 Feet AGL.
Comet CHA-250B HF Vertical at ~24 Feet AGL For HF.
Ratzlaff Active whip, 5 Foot Long, ~16 Feet AGL For LF/MW/HF.
Wellbrook ALA1530LN Loop For LF/MW/HF at ~17 Feet AGL
Diamond Discone ~35 feet AGL for Scanner.
Merced, Central California, 37, 18, 37N 120, 30, 6W CM97rh

On 7/28/2021 9:11 PM, Tim Germain wrote:
I had to do a reset on my laptop.  Now I don't have my hub information for DC++.  I was on the OTRHub and Phils Place.  Would someone please help be with the information I need to get back onto these hubs?  You send me the information off-line if you wish.  Thank you in advance.

Tim Germain

Join main@OldTimeRadioResearchers.groups.io to automatically receive all group messages.